How to Setup Drivers Big Screen

How to Setup Drivers Big Screen

  • Plug the TV\Screen in to the computer 
  • Make sure your computer is setup to extend desktop to the 2nd display.
  • Once this is done, load up ArrowPos
  • Click on Back Office button.
  • Make sure you log in as a tech
  • From the Back Office, go to Configuration > Global / Station Configuration
  • Once in the Global / Station configuration screen, find the setting for customers.


  • On the Customers settings, go to the setting Get Address Distance. Change this setting to yes.
  • On the Global / Station Configuration screen, click on the Station Configuration button on the top of the screen.
  • Click on the Show Tech Mode option on the top of the screen then click on the station that you are adding the screen to.
  • Scroll down till you see the setting called Driver Dispatch – What Screen Number will be used for the Driver Dispatch Map All Display.
  •  Change this setting to read 1 (Take the (–) out that is before the 1).
  • Exit out of ArrowPos.
  • Reload ArrowPos.
  • You should now see the map on the TV / Big Screen.


    • Related Articles

    • How to Setup Drivers Big Screen

      Plug the TV\Screen in to the computer  Make sure your computer is setup to extend desktop to the 2nd display. Once this is done, load up ArrowPos Click on Back Office button. Make sure you log in as a tech From the Back Office, go to Configuration > ...

    • WhozzCalling Caller ID Setup

      NETWORK CALLERID The network caller ID must be plugged into the arrow network, if it is connected correctly the lights on the front of the box will light up as the location receives calls. • Log in to arrow and go to back office ( You must go in to ...

    • Checking Out Drivers in ArrowPOS

      Make sure the driver that we wish to checkout has claimed and returned from all the deliveries they’ve handled today in the Driver Dispatch Screen. Provided that’s been completed, have the driver sign out for the day from the Driver Dispatch Screen. ...

    • How to setup a Network/IP Printer

      How to Setup an IP Printer First you need to find out the IP address of the printer SNBC/Epson printers you would turn the printer off and hold down the paper feed button on the front of the printer and turn it on with you still holding down the feed ...

    • World Pay Chip Reader Setup

      World Pay Chip Reader Setup 1. Plug in device + power 2. Load driver for VX805 USBUART (in the ftp, under tech stuff>drivers>vx805 usbuart) If the device is properly connected to the station you will see an alert stating that the driver was installed ...