Zoho Mail Signature Setup
From zoho one, access Mail app
Top right of window, click the gear icon for settings
In Mail App Settings Scroll on left and click Signature
Give the signature a name and copy current signature from your email (or copy from Craig's email)
Paste it into the Signature Box in Zoho.
Notice that the image from the email probably didn't transfer, but was replaced by text like "Logo Description automatically generated"
Remove that by clicking on the line and choosing remove
Notice that the image from the email probably didn't transfer, but was replaced by text like "Logo Description automatically generated"
Remove that by clicking on the line and choosing remove
place your cursor in that same space, and click the double down arrow at top of signature box.
Choose Insert Image
In Insert image pop up, choose Upload from URL
Copy & paste this url into box
https://s3.us-east-2.amazonaws.com/arrowpos.com/images/Full_Logo/Arrow_Logo_1000x246.png
choose Best Fit
and click Insert
https://s3.us-east-2.amazonaws.com/arrowpos.com/images/Full_Logo/Arrow_Logo_1000x246.png
choose Best Fit
and click Insert
Remove additional spacing before and after image.
Check and adjust table width for Office addresses to make sure they look like below.
Check and adjust table width for Office addresses to make sure they look like below.
Make sure signature is set to be placed above quoted content
associate your email with the signature if not already there
associate your email with the signature if not already there
click save!
Related Articles
ZoHo Application Specific Password
To generate app specific password for Zoho Mail Sign into your Zoho one account Click profile icon at the top right Go to "My Account" Click Security on the left menu Scroll down to Application-Specific Passwords and click Generate New Password In ...Email Client Setup for Zoho Mail
Consider using the zoho mail desktop App! When accessing from the web, please only do this via one.zoho.com and choose mail from the left side of the screen. **IF YOU ARE USING Two Factor Authentication THEN YOU NEED TO CREATE AN APPLICATION SPECIFIC ...WhozzCalling Caller ID Setup
NETWORK CALLERID The network caller ID must be plugged into the arrow network, if it is connected correctly the lights on the front of the box will light up as the location receives calls. • Log in to arrow and go to back office ( You must go in to ...How to setup a Network/IP Printer
How to Setup an IP Printer First you need to find out the IP address of the printer SNBC/Epson printers you would turn the printer off and hold down the paper feed button on the front of the printer and turn it on with you still holding down the feed ...World Pay Chip Reader Setup
World Pay Chip Reader Setup 1. Plug in device + power 2. Load driver for VX805 USBUART (in the ftp, under tech stuff>drivers>vx805 usbuart) If the device is properly connected to the station you will see an alert stating that the driver was installed ...