End of Day/Clock In-Out Screen

End of Day/Clock In-Out Screen


Arrow switches over to the End of Day screen after a Z-out has been performed. It will automatically switch over to the Start of Day screen at its Auto Restart time unless the Z-Out is performed after the aforementioned time. If that is the case Arrow will be stuck on the End of Day Screen.


RESTARTING ARROW


The best path to take here is manually restarting arrow, there are two ways to accomplish this. The first option requires that the user have "Exit To Desktop" permission, if you do not have this permission use option 2.


  1. Click "Exit To Desktop" on the top right and enter your pass code, Arrow will automatically restart.
  2. Plug in a keyboard into the station and press Ctrl+Alt+Del at the same time, click log off. At the User screen select the ArrowUser account, type in the password "arrow" and hit enter on the keyboard. Arrow will launch automatically.


    • Related Articles

    • Red Start of Day Screen

      When you Z out for the day all the stations will go to the time screen that has a red background. This Red background tells you that you need to close out of Arrow and go back in before you can use ArrowPos. To do this all you do is hit the button ...

    • Z-Out End of Day

      PRE Z-OUT PROCEDURES Before starting the Z-Out process check the items listed below. All of these items MUST be addressed or you will not be able to perform the Z-Out. Open Checks - Click “Recall Check” and select “All” and then “Open”. Any unpaid ...

    • End of Day Shutdown

      After a Z-Out your station will switch over to the End of Day screen. To shutdown the station simply click "Power Off Computer", this will initiate the shutdown command in windows. MANUAL SHUTDOWN Note: A keyboard is required for manual shutdown. A ...

    • How to Setup Drivers Big Screen

      Plug the TV\Screen in to the computer  Make sure your computer is setup to extend desktop to the 2nd display. Once this is done, load up ArrowPos Click on Back Office button. Make sure you log in as a tech From the Back Office, go to Configuration > ...

    • How to Setup Drivers Big Screen

      Plug the TV\Screen in to the computer  Make sure your computer is setup to extend desktop to the 2nd display. Once this is done, load up ArrowPos Click on Back Office button. Make sure you log in as a tech From the Back Office, go to Configuration > ...