A11 POSBANK Printers Beep Setup

A11 POSBANK Printers Beep Setup

1. Switch off the printer.
2. Ensure that the paper roll is inserted properly and the end of the roll is
outside the printer with the cover securely fixed.
3. While holding down the FEED button, switch on the power.
4. Continue holding the FEED button until the printer enters 'Setting Mode'.
5. The following properties available to be set will be printed: 


6. While in 'Setting mode', press the FEED button five (7) times, as displayed
on the print out, to enter the 'Set Buzzer control after cutting' submenu.
7. After 2 seconds, the following options will be printed: 


8. Find the option that you wish to change the property to, in this instance ‘2‐
Internal Buzzer’, and press the FEED button the corresponding number of
times (i.e. two times).
9. After 2 seconds, the new settings will be printed.

    • Related Articles

    • How to setup a Network/IP Printer

      How to Setup an IP Printer First you need to find out the IP address of the printer SNBC/Epson printers you would turn the printer off and hold down the paper feed button on the front of the printer and turn it on with you still holding down the feed ...

    • How to Setup a Godex Printer

      You need to plug the printer into the USB and install the driver from the ftp site. Once printer is installed, right click on the printer and go to Properties.  From the Printer Properties, click on Printing Preferences. From Printing Preferences, ...

    • POSBANK unit won't stop beeping

      1.) Press Delete after boot to get into BIOS screen. 2.) Go to Advanced. 3.) Go to H/W Monitor. 4.) Go to Smart Fan. 5.) Go to Smart Fan Mode Configuration. 6.) Turn off CPU Fan Alarm (Change Enable to Disable.)

    • WhozzCalling Caller ID Setup

      NETWORK CALLERID The network caller ID must be plugged into the arrow network, if it is connected correctly the lights on the front of the box will light up as the location receives calls. • Log in to arrow and go to back office ( You must go in to ...

    • How to Setup Customer Waiting Button

      The Customer Waiting button will let the kitchen know if someone is here to pick up their order and it is not done yet. This button will show up on the pay screen after you have paid for the order. There are two setting you need to setup to use this ...